Miscellaneous - DIY
12 Volt DC Power Supplies
Compact, enclosed and waterproof 12VDC power supplies
Ranging from 5 Watts to 100 Watts
with 120~240VAC inputs
Can be used for any of our 12 Volt LED products
See Power Supply selection guide
Click Thumbnails for specific item information
Click Thumbnails for specific item information
12VDC CPS Power Supply
CPS series Compact Enclosed Power Supplies
6, 12, 24, and 50 Watt 12VDC systems
100~240VAC 50/60Hz Input
4 foot long AC in and DC out cables
CPS Series Adapter Cable
2ft Power Adapters connect CPS series Compact Power Supplies to LED Products. CPS-PT exposed pigtail wire adapter can be used with any of our 12VDC Products. Other specific adapters include LB1, LB2, LB3, LB4, FLB, FLB30, RLB, NFLS & RGB2
12VDC Waterproof Power Supply
Regulated Switching Power Supplies
5 Watt, 10 Watt, 15 Watt, 30 Watt, 60 Watt, 100 Watt
120VAC Input - 12VDC Output
Completely sealed (IP67 rating) with aluminum housing
12VDC Power Supply
Enclosed 12VDC Regulated Switching Power Supply
100 Watt, 60 Watt, 40 Watt, 25 Watt
Input (VAC@Hz) 85-264@47-63
Certification: UL,TUV,CE
Installation Supplies
Accessories for various projects using low voltage LED products in and around your house or for your vehicle.
Click Thumbnails for specific item information
Click Thumbnails for specific item information
Two Conductor Power Wire
Power Wire for low voltage installations
18 Gauge Two Conductor Parallel Bonded Wire
14 Gauge Two Conductor jacketed Brake Cable resistant
to standard automotive oils, grease and chemicals
Organization and Mounting Supplies
UV resistant Black Nylon Cable Ties used to bundle and secure wire and cable for organized installations 
4 inch Cable tie with 18lb tensile strength - .875" max dia.
11 inch Cable tie with 50lb tensile strength - 3.062" max dia.
Closed-Cell Acrylic Foam Tape 3M VHB tape has high performance adhesive on both sides for attaching Light Bars and other LED Modules to a wide variaty of surfaces
Waterproof & Non-Waterproof Splice Taps
Insulated Displacement Connector Terminal Splice Tap for 18 to 14 Gauge wire
Non-Waterproof version or 3M Waterproof Sealant Filled version
Toggle Switch and Female Push On Disconnect Tabs
20Amp ON/OFF SPST Black Nylon Toggle Switch with two 1/4" Male Contact Terminals - Mounting stem is 15/32" diameter and fits panels up to 1/8" thick
Nylon fully insulated Push On 1/4" Female Tabs with butted seam and accepts 22-18 and 16-14 Gauge wire
Mini-Automotive Fuse Supplies
Mini-Automotive Blade Fuses, Circuit Protection Fuse Tap, and Fuse Holder for automotive aftermarket lighting applications
Universal LED Dimmers
Single Color LED Dimmers can dim any 12VDC LED products from 0 to 100 percent using Pulse Width Modulation (PWM) circuit.
Click Thumbnails for specific item information
Click Thumbnails for specific item information
LDP-2A
Knob control for full intesity adjustment range. Maximum Load is 2 Amps, has Male and Female 5.5mm barrel power connector for connecting in-line with our CPS series Power Supplies
LDR-2A
Built in slider control. Maximum Load is 2 Amps, screw terminals for input/output. Optional Remote Knob and Mounting Plate available.
LDB-8A
Push Button control for stepped intesity adjustment range. Maximum Load is 8 Amps, spring terminal connectors for power in and out connections.
LDK-8A
Knob control for full intesity adjustment range. Maximum Load is 8 Amps, has removable screw terminal connector for power in and out connections.
LDRF-8A
Radio Frequency (RF) remote control with Push Buttons for stepped intensity adjustment range. Maximum Load is 8 Amps, spring terminal connectors for power in and out connections.
Universal Remote Control System
Universal Remote Control System for 12VDC LED products
Includes Single Channel Receiver and 2 Transmitter Fobs
5 Amp maximum load - 150 feet range
Great for Accent Light applications - 12VDC Operation
Can be used with any 12VDC LED products such as Light Bars & Strips, Landscape Lights, and Accent Lights for vehicles and home
LED Empty Bases and Sockets
Empty Bases, Sockets, & Wired Sockets for Festoon, Miniature Wedge Base, BA15 & BA9 Base LED Bulbs
Click Thumbnails for specific item information
Click Thumbnails for specific item information
BA9s Base Wired Socket
Single(BA9S)Contact 9mm Miniature Bayonet Base wired sockets
9 3/4 inch long power wires
single screw mounting hole on positive wire bracket
BA15 Empty Bases
Single Contact Single Intensity (BA15S - 1156), Dual Contact Single Intensity (BA15D - 1142), Dual Contact Dual Intensity (BAY15D - 1157) 15mm Bayonet Bases
Can be used to create your own LED bulbs
BA15 Base Wired Sockets
Single Contact Single Intensity (BA15S - 1156), Dual Contact Single Intensity (BA15D - 1142), Dual Contact Dual Intensity (BAY15D - 1157) 15mm Bayonet Base wired sockets - 5 1/4 inch long power wires, screw mount base 1 1/4 inch apart
Festoon Bulb Sockets
solder contacts and 1/8 in centered mounting hole
sockets measure 2in(L) x 11/16in(W)
FS-31 - solder terminals for 31mm Festoon bulbs
FS-42 - solder terminals for 42mm Festoon bulbs
168/194 Miniature Wedge Base Sockets
T10mm Sockets for Miniature Wedge Base Bulbs
T10S-SP - Socket with solder terminals and mounting hole
T10S-TW - Instrument cluster twist-lock base socket
G4/MR16/MR11 to BA15 Adapter
Convert BA15S single intensity single contact base with parallel locking pins, BA15D single intensity dual contact base with parallel locking pins, or BAY15D dual intensity dual contact base with offset locking pins to fit G4/MR16/MR11 base lamps
Bare Circuit Boards
Use our LED resistor calculator on our LED Info page to determine resistor values
- no documentation included
Click Thumbnails for specific item information
Click Thumbnails for specific item information
Universal LED PCB
3 series circuits in parallel, has places for nine 5mm or 3mm LEDs and three 1/4 watt resistors.
Board has power connections at both ends for daisy chaining multiple units together.
Measures 4-1/2 x 1/2 inch.
MLED PCB
Bare circuit board fits 9mm wedge base bulb socket has pads for up to four 5mm or 3mm LEDs and one 1/4 watt resistor
measures 3/8 x 1 3/4 inches.
Wired LEDs and LED Bolts
12 VDC operation - LED Accent Light Single LED modules
All units are weatherproof and suitable for outdoor installation
Applications: Car - Motorcycle - Home - ATV - Boat - Truck - Accent Lighting
Available in White Blue Green Red Yellow UV (BlackLight) and RGB
Click Thumbnails for specific item information
Click Thumbnails for specific item information
LW-RGB Wired RGB LED
Color Changing RGB LED with 3.25 foot long power wire. Slowly cycles through Red, Green, Blue, (and combinations of them) to produce an array of vivid color. Waterproof and submergible.
LW-12VDC Wired LED
LED with 3 foot long 30 ga. stranded wire. Panel mounting bezel included. Also available in Blinking Red
5mm and 10mm LED Bolts
Can be used to replace license plate and other bolts on cars and motorcycles. Includes 30 inch connecting wires and mounting nut. Waterproof
Wireless Motion-Sensor LED Flood Lights
Wireless Motion-Sensor LED Flood Lights can be mounted anywhere indoors or outdoors by almost anyone in minutes. Battery operated motion sensing LED lights provide an energy-efficient solution for many of the darkness issues inside and outside your home. Great gift ideas
Compare Wireless Motion-Sensor LED Lights
Click Thumbnails for specific item information
Click Thumbnails for specific item information
MB360 Wireless LED Flood Light
Motion Sensor turns flood light on and off automatically, detects motion up to 30 feet away at 180 degrees. Weatherproof design with no wiring required (uses 3 'D' size batteries). Bright, 120 lumen LED, can light up patios, decks, stairwells, hallways, garages, entrances/exits, etc.
MB980 Wireless LED Motion-Sensor
Ceiling Light
180 degree Motion Sensor turns ceiling light on automatically. Weatherproof design with thin profile, 4.9 inches in diameter, and no wiring required
(uses 4 'C' size batteries).
Wireless Motion-Sensor All-Purpose Lights
Wireless Motion-Sensor LED All-Purpose Lights can be mounted anywhere indoors or outdoors by almost anyone in minutes. Battery operated motion sensing LED lights provide an energy-efficient solution for many of the darkness issues inside and outside your home. Great gift ideas
Compare Wireless Motion-Sensor LED Lights
Click Thumbnails for specific item information
Click Thumbnails for specific item information
MB530 Wireless LED Stair Light
180 degree Motion Sensor turns stair light on bright mode automatically. Low glow mode in darkness. Weatherproof design with no wiring required (uses 3 'C' size batteries).
MB720 Wireless LED Motion-Sensor All-Purpose Light
Motion sensor turns All-Purpose light on automatically. Thin profile with weatherproof design, no wiring required
(uses 4 'AA' size batteries).
LED Stick-Up Push-Light
Battery operated potable lights contain 6 LEDs
3 Narrow beam and 3 Wide beam
Operate on three included AAA batteries and attached with included double sided foam tape
Pressing the lens cycles through 4 modes:
3 Narrow beam LEDs only, 3 Wide beam LEDs only,
All 6 LEDs ON, and All 6 LEDs OFF
Plastic housing measures 2-3/4 x 3/4
Available with various housing colors and LED colors
RGB LED Candle Light w/Remote
Candle Light with Color Changing RGB LED and IR Remote Control - Remote controls ON/OFF, 2 timers, 12 different static and 1 dynamic color change mode. Any color mode can also be set to constant or (candle realistic) flicker mode - Candle measures 2.5 inch dia. x 1.9 inch tall - IR Remote has included CR2025 3V battery - Candle takes 3 x AAA batteries which are not included - 100+ hours battery lifetime
Selenite Tower with RGB Color Changing LEDs
The Selenite Tower is a form of gypsum, a very soft, translucent and colorless mineral
3 of our RL5-RGB-ACC automatic color changing LEDs illuminates the entire rock
Plugs directly into 120VAC outlet
 |
|
|
