30-LED 1156/1157 Bulb
SPECIFICATIONS

Part NO Emitting Color Operating Voltage Range
Unit: VDC
Current Draw @ 12 Volts
Unit: mA
Single LED Luminous Intensity
Unit: mcd
Dominant Wavelength / CCT*
UNIT: nm / K
Beam Pattern
Unit: degrees
1156-W30 White 9~14.8 81 7500 8500 16
1157-W30 White 9~14.8 28/89 7500 8500 16
1156-W30-RA White 9~14.8 68 7500 8300 35
1157-W30-RA White 9~14.8 31/80 7500 8300 35
1156-B30 Blue 9~14.8 84 2850 474 16
1156-G30 Green 9~14.8 81 13200 532 16
1156-R30 Red 9~14.8 105 5000 628 16
1157-R30 Red 9~14.8 30/104 5000 628 16
1156-R30-RA Red 9~14.8 93 5000 628 35
1157-R30-RA Red 9~14.8 23/76 5000 628 35
1156-A30 Amber 9~14.8 122 5300 593 16
1157-A30 Amber 9~14.8 31/123 5300 593 16
1156-A30-RA Amber 9~14.8 68 5300 590 35
1157-A30-RA Amber 9~14.8 21/72 5300 590 35
Operating Temperature Range: -30°Cto+85°C --- Storage Temperature Range: -40°C to +100°C --- Up to 10,000 hour life span
* White LED Note: Correlated Color Temperature measured in Kelvin, higher numbers indicate blue/purple tint (similar to HID lamps), standard incandescent bulbs are around 3000K

Adobe Reader 8 or later required to run interactive 3D PDF - Click here to download

30-LED 1156 with
metal housing


1156-R30 with clear housing

30 x 5mm LEDs - Also available with Blue or Green LEDs

*All of our 30-LED 1156 and 1157 bulbs will be changed over to this style as stock is depleted on the metal housed units seen in above/left drawing - click a "buy now" button to enter our online store and see which bulbs still have the metal housings

Click image for 3D view

1157-A30-RA

30 x 5mm LEDs, facing at a 90 degree angle from base
Typical motorcyle bulb
Click image for 3D view
Click bases for dimensions and contact descriptions

We also offer empty BA15 Bases and Wired Sockets


Adobe Reader 8 or later required to run interactive 3D PDF - Click here to download

Dimensions in millimeters (inches)

Note: these bulbs are oversized - please measure your bulbs housings and see dimensional drawing above to determine if they will fit your application Forcing them into sockets where they will not fit can break off the locking pins and void the warranty