ST series Truck Stop/Tail/Turn Lights
10 High Power WHITE LEDs, 30 Super Bright WHITE LEDs, 61 RED or AMBER LEDs
Current Draw @ 13 VDC: ST-x61 Tail: 0.060 Amp / Brake: 0.440 Amp (440ma)
ST-W30 White: 0.170 Amp (170ma) ST-WHP10 White: 0.270 Amp (270ma)
These 4 inch diameter lights are sealed and have standard 3-Pin female connectors
Grommets, Mounting Flanges, Tail Light Assembly Brackets and 3-Pin plugs are also available in our online shopping cart
PT series Truck Stop/Tail/Turn Lights
Available with 10 High Power WHITE LEDs
56 Super Bright RED or AMBER LEDs only available with or without a built-in flange
Current Draw @ 12 VDC: PT-WHP10 White: 0.220 Amp (220 Amp)
PT-x56 Tail: 0.040 Amp (40ma) / Brake: 0.300 Amp (300ma)
These 6.5 x 2.2 inch oval lights are sealed
Standard 3-Pin female connectors
Grommets and 3-Pin plugs are also available in our online store
RT series Truck Stop/Tail/Turn Lights
Available with 24 Super Bright WHITE RED or AMBER LEDs
Current Draw @ 12 VDC
RT-x24 Tail: 0.035 Amp (40ma) / Brake: 0.220 Amp (300ma)
These 5.3 x 3.4 inch rectanglar lights are sealed
Standard 3-Pin female connectors
Grommets and 3-Pin plugs are also available in our online store
SB7 series School Bus Lights
7 Inch diameter Bus/Truck Stop/Tail/Turn Lamp Sealed
12 VDC, DOT SAE Approved
4 stainless steel mounting holes
Available with Red or Amber LEDs
Straight 3-PIN Socket with 11 1/2 inch wires
Truck Light Plugs, Connectors & Sockets
Various wiring for different types of Truck Lighting including:
PL-3x Plug for ST, PT, and RT series
PL-2S Plug for M4 and M5 Marker Lights
PLF-02 Connector Wire for PBM and MOC Marker Lamps
M1 series Truck Clearance Marker Lights
Available with 12 Super Bright RED or AMBER LEDs. Sealed Lights have grounded mounting hole and 5 inch long positive wire
Current Draw: 0.065 Amp (65ma) @ 12 VDC
M2 series Truck Clearance Marker Lights
Available with 12 Super Bright RED or AMBER LEDs
Standard 2 Pin snap in mounting
Current Draw: 0.065 Amp (65ma) @ 12 VDC
Chrome 2 pin snap mounts sold in store also
M3 series Truck Clearance Marker Lights
Available with 6 Super Bright RED or AMBER LEDs
Sealed Mounting, grounded mounting hole & attached positive wire 12VDC
Current Draw: 0.036 Amp (36ma) @ 12 VDC
M4 series Truck Clearance Marker Lights
Available with 13 Super Bright RED, AMBER, or WHITE LEDs
Lens measures 2.5 inches diameter
Built-in gray PVC 3 hole mounting flange
uses PL-2S plug sold in our store
Also available without built-in flange
Current Draw: 0.090 Amp (90ma) @ 12 VDC
M5 series Truck Clearance Marker Lights
Available with 13 Super Bright RED, AMBER, or WHITE LEDs
Lens measures 2 inches diameter
Built-in gray PVC 3 hole mounting flange, uses PL-2S plug sold in our store
Also available without built-in flange
Current Draw: 0.050 Amp (50ma) @ 12 VDC
M6 series Truck Clearance Marker Lights
Available with 6 Super Bright RED or AMBER LEDs
measures 3.125 x 1.00 inches
Sealed Mounting, grounded mounting hole & attached positive wire
Current Draw: 0.034 Amp (34ma) @ 12 VDC
M7 series Truck Clearance Marker Lights
Available with 6 Super Bright RED or AMBER LEDs
measures 3.5 x 0.80 x 1.3 inches
Sealed Mounting, grounded mounting hole & attached positive wire
Current Draw: 0.034 Amp (34ma) @ 12 VDC
M8 series Truck Clearance Marker Lights
Available with 8 High Flux RED or AMBER LEDs
Sealed Lights have grounded mounting hole and 10 inch long positive wire which can be removed
Current Draw: 0.070 Amp (70ma) @ 12 VDC
M9 series Truck Clearance Marker Lights
Available with 6 Super Bight RED or AMBER LEDs
Measures 3.125 x 1.00 inches
Sealed Mounting, grounded mounting hole & attached positive wire
Current Draw: 0.034 Amp (34ma) @ 12 VDC
M10 series Stud Mounted Truck Marker Lights
Available with 2 High Flux RED or AMBER LEDs
Sealed Lights have Stud Mounting screw and locking nut on back for surface mounting
5 inch long positive(+) wire
Current Draw: 0.040 Amp (40ma) @ 12 VDC
MSM series Truck Clearance Marker Lights
Available with 4 High Power Super Bight RED or AMBER LEDs
Lens measures 2 inches diameter Built-in gray PVC 3 hole surface mounting flange
uses PL-2S plug sold in our store
Current Draw: 0.030 Amp (30ma) @ 12 VDC
MSS series Truck Clearance Marker Lights
Marker Light with Stainless Steel protective bracket
Available with 2 Super Bright High Flux RED or AMBER LEDs
12 VDC, measures 2.66 x 1.30 x 0.97 inches
Sealed Mounting
7 Inch power wires exit through center of back
Current Draw: 0.030 Amp (30ma) @ 12 VDC
MDB series Double Bulls Eye Marker Lights
Double Bulls Eye Truck Clearance Marker Light with 12 Super RED or AMBER LEDs
Current Draw: 0.058 Amp (58ma) @ 12 VDC
MR180 series Marker Lamp
Truck Clearance Marker Light with 4 High Flux LEDs and 2 Side Emitting LEDs for 180 Degree Beam Pattern
12 VDC, Lens measures 1.82 x 2.65 inches
DOT SAE Approved
Available with Red or Amber LEDs
PBM-xHP12 series Marker/Clearance Lights
Peterbilt Marker/Clearance Light with 12 High Power SMD RED or AMBER LEDs
Has 6 inch 2-wire pigtail and chrome plated metal mounting bezel
Waterproof
Current Draw: 0.110 Amp (110ma) @ 12 VDC
PBM series Marker/Clearance Lights
Peterbilt Marker/Clearance Light with 6 Super RED or AMBER LEDs
Has 10 inch 2-wire pigtail and chrome plated metal mounting bezel
Waterproof
Current Draw: 0.034 Amp (34ma) @ 12 VDC
MOC series Oval Clearance Marker Lights
Oval Clearance Marker Light with 8 Super RED or AMBER LEDs
Surface mounting with snap on chrome plated plastic trim ring that covers mounting screws
Uses PL-2s Plug
Current Draw: 0.024 Amp (24ma) @ 12 VDC
MBC series Cab Top Marker/Clearance Lights
Clearance Marker Light with 24 Super RED or AMBER LEDs
measures 1.25h x 2.5w x 3.375 inches
Grounded mounting hole and 5" long positive wire
Current Draw: 0.11Amp (110ma) @ 12 VDC
|
